Rx Batteries

ED-Nano (A123) Battery 2S1P with

• 22AWG Rx connector
• and JR Node/Balance connector

Suitable for all Receivers, most do not require a regulator. (Check with your radio manufacturer)

For matching switch, check out our Ultra Switch II ED-Nano (below)

Size: 2.1"W x 2.7"L x 1.1"D
Wt. : 5.5oz. (Compare 5KR-2400SC NiCd: 11oz.)

Use only with approved chargers

ED-Nano (A123) Battery 2S1P Heavy-Duty with

• 22AWG JR Node/Balance connector
• and 14AWG high-current cable with Deans Ultra connector
    (up to 25 Amps continuous for high-current charge/discharge)
• Available with EC3 connector for JR/Spektrum Rx's (e.g. AR9100, R922, R1222)
  
• Now also available with Muliplex ECU Connector for turbines (JetCat, Jet Central, WREN, etc.)

Suitable for all Receivers, most do not require a regulator. (Check with your radio manufacturer)

Also suitable for some turbines (Check with your turbine manufacturer)

Size: 2.1"W x 2.7"L x 1.1"D
Wt. : 5.7oz. (Compare 5KR-2400SC NiCd /w Deans: 12oz.)

Use only with approved chargers

ED-Nano (A123) Battery 2S1P with

• 22AWG JR 2-wire Power connector or
  Upgrade to Deans Ultra-16AWG HD Power cable/connector
• and JR Node/Balance connector

Suitable for all Receivers and Electronic Ignition Modules, most do not require a regulator. (Check with your radio or ignition manufacturer)

For matching switch, check out our Ultra Switch II ED-Nano (below)

Size: 1.5"W x 2.7"L x 0.85"D
Wt. : 3.0oz. (Compare 5KR-1100AAU NiCd: 4oz.)

Use only with approved chargers

ED-Nano (A123) Battery 2S2P with

• 22AWG Rx connector
• And JR Node/Balance connector

Need more capacity for that BIG 3D ship?
Honking 4600mAH and still lighter than a 5KR-2400SC NiCd!

Suitable for all Receivers, most do not require a regulator. (Check with your radio manufacturer)

Size: 2.1"W x 2.7"L x 2.1"D
Wt. : 10oz.

Use only with approved chargers

ED-Nano (A123) Battery 2S2P Heavy-Duty with

• 22AWG JR Node/Balance connector
• and 14AWG high-current cable with Deans Ultra connector
    (up to 25 Amps continuous for high-current charge/discharge)
• Available with EC3 connector for Spektrum Rx's (e.g. AR9100, R922, R1222)
  

Need more capacity for that BIG 3D ship?
Honking 4600mAH and still lighter than a 5KR-2400SC NiCd!

Suitable for all Receivers, most do not require a regulator. (Check with your radio manufacturer)

Now also available with Multiplex Power Connector for ECU's.  (Check with yout turbine manufacturer for compatibility)

Size: 2.1"W x 2.7"L x 2.1"D
Wt. : 10oz.

Use only with approved chargers

Click HERE for Charging Instructions

Universal (JR/Hitec) connectors standard.

Click HERE for Charging Instructions

Universal (JR/Hitec) connectors standard.

Click HERE for Charging Instructions

Universal (JR/Hitec) connectors standard.

Click HERE for Charging Instructions

Universal (JR/Hitec) connectors standard.

E-Z, No-Hassle Balance-charging of on-board
ED-Nano (A123) Rx and Ignition batteries

Use with the Ultra Switch ED-Nano for convenient charging, balancing and cycling WITHOUT disconnecting any onboard cables!

• Convenient 24" length - no need to dangle the charger off the side of your airplane!
• Max charge current: 4 Amps
• Input:
  JST-XH (6S) and Dual Banana Jacks plug into an A123/LiFe-compatible charger
  e.g.
  • ED-Nano B6AC Pro
  • Turnigy Accucel
  • Thunder Power 610C with XH Balance Board
    

    

• Output:
  Heavy-Duty JR 3-wire Female Charge Plug
  
  Plugs into the Ultra Switch ED-Nano on your aircraft (no-muss-no-fuss, no fishing for Balance leads!)
  
  OR
  Directly into the 3-wire Balance Cable on our ED-Nano (A123) Rx packs
  

Replaces our old EDC-77N-XHC ED-Nano JST-XH Combo Balance-Charge Cord