LiteSys Starter System with Transmitter-controlled switching. Our most popular Starter System!
Requires 4.8V - 6.6V battery. E.g.:
This is the Basic Minimum Lighting System on most aircraft. It may be expanded easily with extra plug-and-play lamps, extensions and modules.
Need lenses? Check out:
Lamp Covers for ED SunVis Lamps.
Vacuum-formed lamp covers to protect your SunVis lamps and give the model a "scale-look"
Intensifying Lens for ED SunVis Landing Lamps.
Focuses and concentrates the light output of the EDR-117LW Landing Lamp, increasing the brightness up to 3 times.
LiteSys Starter System.
Sunlight-Visible beyond Ultra-Bright Beacon (more than 130 lumens).
Optimized for 360° all-round illumination.
Single-lamp Red Beacon, flashes approximately once-per-second.
Simulates Vertical Stabilizer beacon on full-size aircraft.
Sunlight-Visible beyond Ultra-Bright Strobe (more than 130 lumens).
Two Synchronized Red Beacons, flashes approximately once-per-second.
Same as our EDR-117SR, but with an additional Synchronized lamp.
Simulates fuselage beacons (one on top and one below) on full-size aircraft.
Single-lamp White Strobe, flashes approximately once-per-second.
Simulates Fuselage Strobe on full-size aircraft.
Two Synchronized White Strobes, flashes approximately once-per-second.
Same as our EDR-117SW, but with an additional Synchronized lamp.
Simulates Wingtip and Fuselage (one on top and one below) Strobes on full-size aircraft.
Single-lamp White Strobe, flashes twice, pause and repeats, approximately once-per-second.
Often used on vertical fins on full-size aircraft as anti-collision strobe.
Two Synchronized White Strobes, flashes twice, pause and repeats, approximately once-per-second.
Same as our EDR-117AC, but with two synchronized strobes instead of one.
Often used on wingtips on full-size aircraft.
Sunlight-Visible beyond Ultra-Bright Lamp (more than 130 lumens).
Installed on the Port (Left) Wing on most aircraft.
Installed on the Starboard (Right) Wing on most aircraft.
Installed on the tail end (furthest point from the nose, facing rearward) on most aircraft.
Optimized for 70° forward illumination.
Manual Switch for LiteSys Model Lighting System.
Input: 4EN-800AAA, EDN-2S1P-VX or equivalent Battery Output: 4 ED SunVis Lamps. Expandable with additional EDR-117D4 Distributor's
Programmable RC Switch for LiteSys Model Lighting System. Plugs into your Rx and provides 2 types of output to control of up to 2 x 5 lamps:
Requires:
Distributor for LiteSys Model Lighting System.
Expands 1 output to 4 outputs
Cable Extension for LightSys Lamps. 36in. long
Cable Extension for LightSys Lamps. 12in. long
